Adjustable Car Phone Holder for Windshield and Dashboard
$34.80
One adjustable ABS/PC car phone holder with a suction base for a suitable windshield area or clean, smooth dashboard. Manual side clips and bottom feet hold the phone; thick cases may affect fit.
SKU: SW-CAR-PHONE-HOLDER-0062
Categories: Automotive, Mounts & Holders
This adjustable car phone holder gives your smartphone a mounting position on a suitable windshield area or a clean, smooth dashboard. The manual side clips and bottom support feet hold the phone while the arm and holder allow height, tilt and angle adjustment. It suits drivers who want to set up their navigation screen before departure.
Choose the surface before the position
A suction base needs a clean, dry, smooth contact area. Avoid rough, soft, oily or heavily textured dashboard surfaces. Choose a position that leaves your road view, controls and airbag areas clear. Check the base regularly, especially after temperature changes or cleaning.
Check the phone with its case on
Phone fit depends on its width, case thickness and any attached grips. Place the phone against the front pad with its lower edge on the support feet, then close the side clips. Check that it sits properly and that the clips do not press buttons. No exact clamp-width range is specified.
Set up while parked
Clean and dry the contact area, secure the suction base, then adjust the arm and holder. Fit the phone and check the grip before driving. Set your route while parked and stop before changing the setup. This is a mechanical phone holder, not a charger; a phone or charging cable is not part of the purchase.
Holder details
| Quantity | 1 car phone holder |
|---|---|
| Material | ABS / PC |
| Mounting | Suitable windshield area or clean, smooth dashboard |
| Phone support | Manual side clips and bottom feet |
| Adjustment | Height, tilt and rotation angle |
| Package size | Approx. 9 × 8 × 9 cm |
| Gross weight | Approx. 0.5 kg |
Questions before choosing
What is included?
One adjustable car phone holder with a suction base. The phone, case, cloth, cup and cable shown in the pictures are not included.
Will it attach to any dashboard?
No. Use a clean, dry, smooth surface and avoid rough, soft or oily areas. Check the suction grip regularly; dashboard material and surface condition affect suitability.
Will my phone fit with its case?
Fit depends on the phone and case together, including width, thickness and any attached grips. The side clips and bottom feet must seat correctly without pressing buttons. An exact clamp-width range is not specified.
Does it charge the phone?
No. It is a mechanical holder with manual side clips, not a wired or wireless charger.
Are 9 × 8 × 9 cm and 0.5 kg the holder measurements?
The approximate 9 × 8 × 9 cm figure is the package size, and 0.5 kg is the gross weight. They are not the dimensions and net weight of the holder.
Related accessories
Add your review
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.
Find answers to common questions about this product
